Fault

The air leg drill uses compressed air to drive the piston to move back and forth. The piston strikes the drill tail during the stroke, and the piston drives the drill tool to rotate during the return

Circuit fault and oil circuit fault are two common faults of internal combustion rock drill. It is also known that the internal combustion rock drill is a tool for directly mining stone.

The following Xiaobian explained that the solution about the fault of the internal combustion gasoline rock drill, hoping to help you.

Matters needing attention in the maintenance and maintenance of air leg rock drills (1) Before using the new machine of the air leg rock drill, it is necessary to disassemble and clean the internal p

1. Main reasons for lower drilling speed of air leg rock drill: The main reasons for the reduction of drilling speed are low pressure in the working environment, poor lubrication of the machine, insu

The reason for the formation of air leg rock drill water needle fault: The center hole of the shank is not correct, the gap between the shank and the shank is too large, the water needle is too long,